beretta storm – JLS Beretta RX-4 STORM Inspires Airsoft Version
At first glance, you might think that this was an alien blaster. Believe it or not, this is a real design, based off of one a real beretta storm rifle! Beretta handguns and rifles pride them selves on innovative design, and this Airsoft version does not disapint. This model, the JLS Beretta RX-4 STORM is fitted to accept standard M4 magazines. It is very ergonomic and has an adjustable stock.
Unfortunately the Beretta storm Airsoft version, with the stock extended, moves in all directions and had to be super glued to the retainer in the receiver to stop most of this movement. However, even after being glued there was still a bit of play on the stock. The safety and selector switches located next to the trigger. The safety is a bar type similar to a L85 and the selector is pushed up for auto and down for single shot. Both are pretty solid and shouldn’t give any problems. The hop can be adjusted by pulling the cocking lever backwards and turning the hop dial. This is similar to a M16/M4 hop up.
THE MAGAZINE IS RELEASED BY A BUTTON ON THE RIGHT HAND SIDE OF THE GUN AND THE BUTTON ON THE LEFT HAND SIDE IS FALSE. WITH JLS BERETTA STORM MAKING THE RELEASE ON THE LEFT HAND SIDE AS IT NOW MEANS THAT TO REMOVE THE MAGAZINE YOU HAVE TO USE YOUR TRIGGER HAND, IF YOU ARE RIGHT HANDED. TO FIT A BATTERY THE FRONT FORE GRIP NEEDS TO BE REMOVED AND THIS IS DONE BY REMOVING THE LARGE NUT AT THE FRONT OF THE FORE GRIP AND IT SLIDES OFF.